Sprinkler Leak Detection
Find hidden irrigation leaks before they waste more water or soften the ground around your home.
Explore this serviceFulshear-area irrigation service
Sprinkler System Repair
A sprinkler problem can begin with one dry patch and quickly become a higher water bill or damaged landscape. We inspect the system zone by zone, explain what failed, and focus the repair on the parts that need attention.
Common warning signs
When to schedule an inspection
- A zone will not start or stop
- Water pools around heads or valve boxes
- Coverage changed suddenly
- The controller runs but nothing waters
Our approach
A repair process built around evidence
Irrigation components work together. Checking the affected path separates the symptom from the cause.
01
Listen to what you have noticed
02
Run and inspect each affected zone
03
Locate the failure and explain options
04
Repair, adjust, and test the complete cycle
A full-system repair visit in the Fulshear area starts by running the zones you named, then the zones next to them. Heat, clay, and afternoon storms along FM 1093 and FM 359 move soil enough to crack fittings that looked fine in the spring.
We separate a supply problem from a zone problem before any parts are replaced. If every zone is weak, the shutoff, filter, or pressure at the house is the first check. If one zone is weak, the search stays on that valve, wire, and lateral.
After the repair, the same zone is run long enough to see heads rise, stop, and hold. That retest is what tells us the symptom is gone rather than paused.
Keep exploring
Related sprinkler services
Sprinkler Head Repair
Replace broken, tilted, clogged, or mismatched heads and restore even coverage.
Explore this serviceSprinkler Valve Repair
Diagnose valves that chatter, seep, stay open, or leave an entire zone inactive.
Explore this serviceQuestions about this repair
Do you replace the whole system if one zone fails?
Not by default. One dead zone is often a valve, a wire, or a fitting. The rest of the system stays if it tests correctly.
How do you confirm the repair worked?
The affected zone is run through a full cycle so the heads rise, water, and stop. We look for seepage at the repair before we close up.
Request sprinkler system repair
Ready for a better watering cycle?
Tell us what your sprinkler system is doing.
Share the symptoms, your city, and the best phone number. We follow up to plan the next step.